? semiconductor components industries, llc, 2016 march, 2016 ? rev. 0 1 publication order number: NGTD8R65F2wp/d NGTD8R65F2 fast switching rectifier die fast switching low vf rectifier die for free?wheeling applications. features ? fast switching ? low vf typical applications ? industrial motor control ? solar pv inverters maximum ratings parameter symbol value unit peak reverse voltage v rrm 650 v max forward conduction current i f (note 1) a maximum junction temperature t j 175 c stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. depending on thermal properties of assembly. mechanical data parameter value unit die size 2817 x 2817 m 2 die thickness 10 mils wafer size 150 mm top pad size (anode) 2376 x 2376 m 2 top metal (anode) 4 m aisi back metal (cathode) 2 m tiniag max possible chips per wafer 1623 passivation frontside oxide?nitride reject ink dot size 25 mils recommended storage environment: in original container, in dry nitrogen, or temperature of 18?28 c, 30?65%rh type: bare wafer in jar storage time: < 36 months type: die on tape in ring?pack storage time: < 3 months ordering information device inking? shipping NGTD8R65F2wp yes bare wafer in jar NGTD8R65F2swk yes sawn wafer on tape www. onsemi.com die outline v rrm = 650 v i f = limited by t j(max) diode die
NGTD8R65F2 www. onsemi.com 2 electrical characteristics (t j =25 c, unless otherwise specified) parameter test conditions symbol min typ max units static characteristics forward voltage i f = 30 a, t j = 25 c v f 2.1 2.8 v reverse voltage i r = 320 a, t j = 25 c v r 650 v reverse current v r = 650 v, t j = 25 c i r ?1.0 1.0 a product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. die layout a = anode pad all dimensions in m a
NGTD8R65F2 www. onsemi.com 3 further electrical characteristic switching characteristics and thermal properties are depending strongly on module design and mounting technology and can therefore not be specified for a bare die. on semiconductor and the are registered trademarks of semiconductor components industries, llc (scillc) or its subsidia ries in the united states and/or other countries. scillc owns the rights to a number of pa tents, trademarks, copyrights, trade secret s, and other intellectual property. a listin g of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any product s herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any part icular purpose, nor does sci llc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typi cal? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating param eters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgic al implant into the body, or other applications intended to s upport or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer s hall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and dist ributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufac ture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 NGTD8R65F2wp/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative
|
